3837 INNOVATE MOTORSPORTS Genuine LM-2 Wideband AFR Meter 'Basic' Kit

The LM-2 combines an air/fuel ratio meter; a full-function 32-channel datalogger; and powerful software to deliver a complete tuning workshop for less than the cost of one dyno day. Whether you have a piggy-back fuel controller; race carb; aftermarket ECU; ODB-II tuning software; or a flash/chip programmer; an LM-2 is the tool you need to dial in maximum HP. The meter’s award-winningdigital signal processing technology provides data on exactly how rich or lean an engine is running at any load.The LM-2’s self-calibrating circuitry also compensates for changes in temperature; altitude; and sensor condition.

• Patented “Direct Digital” Wideband Technology
• Wideband O2 Compatible with ALL fuel types
• Single or Dual Channel Version Available
• OBD-II Scan tool- read/clear DTCs and log up to 16 channels of CAN OBD-II Data
• Log directly to SD card (not included)
• Playback log data on screen and/or with powerful LogWorks software (downloadable)
• Large high-contrast graphics LCD
• Built-in RPM converter (direct frequency or with optional inductive clamp)
• 4 fully-differential analog inputs
• 2 configurable linear analog outputs
• Positive lock connectors for all connections
• Innovate MTS serial IN and OUT
• USB connection to your PC

The LM-2 also features two fully programmable linear analog outputs to connect to analog gauges; dyno computers; ECUs; piggyback controllers; and other devices with analog inputs.

Analog output 1 comes setup from the factory ready for narrowband simulation; analog output 2 is configured as 0 volt = 7.35 AFR and 5 volts = 22.39 AFR. With the provided LM Programmer software these analog outputs may also be configured by the user.

THIS ITEM IS THE LM-2 BASIC KIT (Different from the LM-2 Single Kit & LM-2 Dual Kit)

The new LM-2 “Basic” Kit (Single Wideband O2) includes the LM-2 meter; Bosch wide-band oxygen sensor; 8 ft sensor cable; cigarette-lighter power adapter; USB cable for PC connection; weld-in bung and plug; and quick-start guide. P/N: 3837

*Note: The LM-2 “Basic” Kit out of the box only includes accessories to display your Air/Fuel Ratio either on the meter and/or on your PC. To log RPM; or to Output the wideband signal to an external device you’ll need the LM-2 Analog IN/OUT Cable optional accessory. For OBD-II features you’ll need the LM-2 OBD-II Cable optional accessory. To record internally to your LM-2 you’ll need the SD Card optional accessory. This unit also comes in a cardboard box; the black hardcase is an optional accessory LM-2 Carrying Case*

Optional accessories are available; please email for enquiries.